- This topic has 8 replies, 3 voices, and was last updated 9 years, 1 month ago by
.
-
Posts
-
@venmc
AdministratorWe still have a few short 18″ and long 29″ sissybars for the raider/warrior/vendetta/vindicator. They mount with blocks that are trough-bolted through the fender. The sissybar with mounting blocks are $495.
I also have logo axle covers in either VXC or v-flags. They are $50 a set. In addition we still have some V head-bolt caps, V-flag and VXC Derby, Inspection and points covers. IM me if you need any of these.
loop-single-reply.php
@venmc
AdministratorI would like to look at the 18″. Can you send a link with picture of??
loop-single-reply.php
@beer
SubscriberI have a 2005 vengeance vendetta and want the short sissy bar with the extension that bolts into it can you send me a pick my email is slickbeer7@gmail.com
loop-single-reply.php
@venmc
AdministratorI don’t have any of those left. I do have the swing arm mounts… if you can find a local guy to make you a bar you could get a set of the mounts from me.
loop-single-reply.php
@beer
Subscriberhow much its the part that mounts to swing arm and side of fender do they a place I could put extensions on the mount
loop-single-reply.php
@marks-raider
SubscriberHey there, I am interested in the 29″bar for my 2005 Raider. I have the short one on it now.I also have all the hardware that is mounted if the other one slips in same way. Would you do an amount plus my sissy bar or just a straight sale. Thanks , Mark
loop-single-reply.php
@wulfband
SubscriberWould you happen to have a pic of the Derby ? and how much are they ? 🙂
Thanksloop-single-reply.php
@marks-raider
SubscriberGood morning, I, looking for a 29 inch sissy bar to replace my shorty. <My raider is an 2005, do you have one that would fit? Thanks, Mark
loop-single-reply.php
- You must be logged in to reply to this topic.