- This topic has 3 replies, 2 voices, and was last updated 15 years, 1 month ago by
.
-
Posts
-
@unknown
A question that came in via email…
I bought a used 05 Banshee.Sick by the way! The headlight bulb is out some one tried to pry out the chrome retainer ring inside the bucket? I removed 2 set screws from the bottom of the bucket the ring will not budge the lens is free. What holds the lens,ring etc. other than the set screws??I hope some one did not glue in the ring. Who is the manufacture of the light maybe they have a blow up of the bucket.
Also it was a repo and the ignition switch is screwed up where can I get a switch for it or will any chrome HD Switch work??
I went on Ten Ten they say it was Kirk’s bike. Also what are the rubber push bulbs for on top of the heads?
loop-single-reply.php
@venmc
AdministratorThere is a spring that you can pull out that wraps around the headlight trim ring. Reach into the hole where the set screw was and you can hook it with a pick. Its like pulling a tape worm out. I forget who made these.
Any HD switch will work. We bought ours from Drag Specialties.
Those are covers for the compression releases. They are to help keep out water.
Join the forum ask your questions here. We all benefit! Welcome to the tribe.
loop-single-reply.php
@dougie693
Subscriberhead lights are made by ad-jure
loop-single-reply.php
@tanguay
SubscriberTHERE IS A BIG RING (CHROME RING) A FRONT ON IT !
TAKE YOUR THUMBS AND PUSH IT DOWN AND UNSCREW
IT(FROM THE RIGHT TO THE LEFT) ,YOU SEE THE 2ND RING BEIND IT AND YOU COULD TAKE A SREW DRIVE TO UNSCREW THE 2ND ON AND AFTER YOU GONNA HAVE THE LENS IN YOUR HAND! 🙂loop-single-reply.php
- You must be logged in to reply to this topic.