- This topic has 5 replies, 2 voices, and was last updated 13 years, 4 months ago by
.
-
Posts
-
@ferminleon
SubscriberAre THere any dealers near Phoenix AZ with the avility to scan, I do have a problem that arrowhead harley cant figure it out,
after a 10 to 15 miles of contiunues ride, head ligth and tail ligths shut off, only head and tail ligths, breaks and sign ligths work, and i just turn off bike for 3 to 5 minutes and they will work for an other 10 to 15 miles..
please helploop-single-reply.php
@venmc
AdministratorMost likely this is a breaker tripping (from heat). I don’t have anyone I could recommend in AZ. Maybe someone else on the forum knows somebody.
loop-single-reply.php
@headjanitor
EditorLocate your 15 amp circuit breakers in the ignition box on the seat post. There will be three 15 amp breakers taped together and you’re looking for the one with the blue wires running to it. This is the breaker that controls the headlight and taillight. If the problem persists after you replace the breaker you’ll need to check for a dead short in that blue wire or headlight plug or taillight socket.
loop-single-reply.php
@ferminleon
SubscriberThank you for the quick response,
loop-single-reply.php
@ferminleon
SubscriberThank you very much, I did that and found it the blue wires fried and touching red wire. thank you Im replacing breaker and wires.
loop-single-reply.php
@headjanitor
EditorGlad to hear you found the issue. Now I can get back to mopping the floors 😉
loop-single-reply.php
- You must be logged in to reply to this topic.