Vengeance

998 American Hotrod Motorcycles

Home » Topics » 2005 Banshee Starter.

2005 Banshee Starter.

Home › Forums › Parts & Technical Info › 2005 Banshee Starter.

Viewing 7 posts - 31 through 37 (of 37 total)
1 2 3
  • Author
    Posts
  • November 20, 2013 at 1:47 am #3070

    @revemup
    Subscriber

    VENMC….

    THANKS FOR THE REPLY…..

    MY PROBLEM WAS NOT INTERMITTENT….IT WAS ALL OF A SUDDEN AND HAS BEEN PERMANENT!!!!!PUSHED THE START BUTTON….SHORT TURNOVER THEN NOTHING????

    I WILL TEST THE BUTTONS/WIRES ETC NEXT…..IF THEY ARE NOT THE PROBLEM WILL GO BACK INTO THE “BLACK BOX” AND CHECK 30 AMP CIRCUIT BREAKER THAT IS ATTACHED TO THE RELAY….SHOULD HAVE DONE THIS BEFORE, BUT WAS SURE IT WAS THE RELAY….OH WELL…THIS SUCKS!!

    I HAVE GONE THROUGH THE DRAG SPECIALTIES WEBSITE TO SEE IF I COULD FIND THE MATCHING BUTTONS NOW INSTALLED ON THE BIKE…..NO LUCK….ARE YOU SURE THEY WERE DRAG SPECIALTIES????

    AGAIN STEVE THANKS FOR THE INPUT!!!

    ROB/REVEMUP

    loop-single-reply.php
    November 20, 2013 at 2:36 am #3071

    @headjanitor
    Editor

    Assuming you still have the factory installed switch housings and switches, your replacement switches thru Drag Specialties are part number 2106-0083.

    http://asset.lemansnet.com/static/sites/dragspecialties/flipper/2013Fatbook//#?page=800

    loop-single-reply.php
    November 21, 2013 at 12:08 am #3072

    @bigr2645
    Subscriber

    Best money I have spent is a manual plunger that bolts on end of starter for 50 dollars all u need to do is turn key on and push the plunger in, This bypasses all switches and relays. Has saved me more than once,

    loop-single-reply.php
    November 21, 2013 at 12:24 am #3073

    @revemup
    Subscriber

    THANKS FOR THE INPUT….SEE PREVIOUS STATEMENTS IN THIS SUBJECT…HAVE INSTALLED SYKE EXTERNAL STARTER PLUNGER….BUT WANT TO SOLVE THE OVERALL PROBLEM OF WHY I CANNOT USE STARTER SYSTEM AS DESIGNED….START FROM THE HANDLEBARS.

    REVEMUP

    loop-single-reply.php
    November 21, 2013 at 12:30 am #3076

    @revemup
    Subscriber

    HEADJANITOR,

    SAW THE SWITCHES YOU REFERENCE IN YOUR RESPONSE.

    I HAVE ATTACHED A COUPLE OF PHOTOS OF THE SWITCHES THAT ARE IN PLACE.

    ANY IDEAS OF WHAT THESE ARE?????

    THANKS FOR YOUR HELP JIM

    ROB/REVEMUP

    Attachments:
    loop-single-reply.php
    November 21, 2013 at 12:34 am #3077

    @headjanitor
    Editor

    The switches from Drag will work. They’re the same style.

    loop-single-reply.php
    November 21, 2013 at 12:43 am #3078

    @revemup
    Subscriber

    THANKS HEADJANITOR!!!!

    ALL I HAVE TO DO NOW IS GET BACK HOME AND GET OFF OF MY LAZY BUTT AND CHECK FOR CONTINUITY/VOLTAGE.

    I’LL ADVISE AS SOON AS I GET THE CHANCE…..

    AGAIN JIM THANK YOU FOR THE INFO.

    ROB/REVEMUP

    loop-single-reply.php
  • Author
    Posts
Viewing 7 posts - 31 through 37 (of 37 total)
1 2 3
  • You must be logged in to reply to this topic.

Runaway American Dream

The Runaway American Dream is based on the roller coaster ride of the amazing startup and eventual implosion of Vengeance Motorcycles during the Chopper Boom at the turn of the 21st century.   In … more

Contact Us

  • Vengeance Motorcycles
  • P.O. Box 506
  • Newport Beach, CA 92661
  • info@venmc.com