Axle

This topic has 2 replies, 2 voices, and was last updated 12 years, 10 months ago by Jim Clifford.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
July 14, 2012 at 9:23 pm #2835

@dublincliff
Subscriber

can front axle size be changed?

loop-single-reply.php

July 20, 2012 at 2:02 am #2836

@chopnoh10
Subscriber

Yes, you can change axle size… it’s expensive. You have to buy new lower front end sliders with the bigger axle. If your trying to install a new rim with a different size axle, it’s easier to go to a bearing shop with your old axle and your new rim and buy a sealed bearing set that meet the inside diameter of your rim hub and outside diameter of your current axle. Hope it helps….chopper of ohio.

loop-single-reply.php

July 20, 2012 at 3:41 am #2837

@dublincliff
Subscriber

Thanks for info. What you said would be cheaper.

loop-single-reply.php
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.