- This topic has 6 replies, 3 voices, and was last updated 12 years, 10 months ago by
.
-
Posts
-
@venmc
AdministratorWelcome! We had those seats made for us and there is a “push” model it has more foam on the back of the seat and pushes the rider up 2″-3″ inches. Here’s a photo of one installed on a Banshee. They are $295. If you want one let me know and I’ll have one made for you.
loop-single-reply.php
@cmmguys
SubscriberI WANT ONE! Again, I moved the seat forward by one extra hole that was on the frame on each side. Now my feet hit the controls, but I am up a bit higher and my feet dont sit flat on the ground. In the photos you can see seat forward, and arrows showing thwhere the VEE should follow the frame downward and paralell topwards the rear end, and that the V should therefore be deeper and go back up sooner, for the “push.” Less padding on the front end, but OK with me! I can be reached for discussion and/or payment at:
David Andrade
Tel 803-628-4186
david.andrade@hexagonmetrology.com
Rockyman@aol.comTHANKS!!!!!!
loop-single-reply.php
@57goldtop
SubscriberIs there a push model for 05 vendetta? Any word on t-shirts? Thanks Dave
loop-single-reply.php
@venmc
AdministratorYes if you have a swing-arm mounted fender. Its the same as the Banshee and Widow.
loop-single-reply.php
@segundo
SubscriberI bent the tongue on a newer softail seat and made if work.
loop-single-reply.php
@venmc
AdministratorI’ve got three swing-arm mounted fender seats being made right now. One is already sold. If you want one email me. scs(AT)venmc.com
loop-single-reply.php
- You must be logged in to reply to this topic.