- This topic has 4 replies, 3 voices, and was last updated 12 years, 8 months ago by
.
-
Posts
-
@tasbo2
SubscriberI have a 2005 Warrior with a 113 S&S. Need to rerplace the fuel line. Looks to be a premolded piece at both ends. Any suggestions.
Thanks,
Bruceloop-single-reply.php
@venmc
AdministratorNo they are just regular fuel line the pre molded look is just from jamming it onto the nipple. I like the tranlucent stuff they sell at the car parts stores.
loop-single-reply.php
@headjanitor
EditorThere is a pre molded fuel line that used to come with the S&S motors but its not worth the money they charge for it. Just use regular fuel line and make sure there are no kinks in it or you’ll cut iff the fuel supply.
loop-single-reply.php
@tasbo2
SubscriberThanks for your help. I found the hose at J&P cycles #401-525 for $7.00. FYI when I disconnected the fuel line from the bowl out poured a bunch of black rubber crap. I slit open the hose and it was all degraded and flaking from the inside. Bike only has 5K miles.
Hose looked good from the outside but was mushy in a few spots so thats why I replaced it.loop-single-reply.php
@wilbur647
SubscriberI am replacing mine this afternoon. Must be a common problem. Mine looks like it is collasping where it turns. Also got a lot of black residue on my hands removing it. Must be rotten.
loop-single-reply.php
- You must be logged in to reply to this topic.