how to adjust the clutch cable on my 2006 Banshee

This topic has 1 reply, 2 voices, and was last updated 12 years, 5 months ago by Jim.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
July 23, 2012 at 12:03 pm #2840

@2006venban
Subscriber

i have the online manual , but i cant seem to find the correct information on how to adjust the clutch cable and how tight the cable should be , any help greatly appriciated.

loop-single-reply.php

July 23, 2012 at 12:17 pm #2841

@headjanitor
Editor

Run the clutch cable all the way out until the clutch
lever touches the handlebar grip. Then run the center adjusting screw on the clutch pack in
until it touches the pushrod, back it out 1/4 turn and tighten the jam nut.
Adjust the clutch cable for 1/8” free play. Note: Braided clutch cables
require little or no free play.

loop-single-reply.php
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.