- This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
@unknown
Definetely check the compression releases. If they are not operating nothing will help. After the compression releases are functional, a good whiz-bang battery and your stock spyke starter should be all you need.
loop-single-reply.php
@venmc
AdministratorI had a very similar problem with my Warrior. First off the plugs were NOT tight and secondly when I replaced them with NGKs she started up as soon as I pressed the button. Before that the battery was going dead.
My 2 cents
kevin
loop-single-reply.php
@venmc
AdministratorKnow on wood…no issues here
loop-single-reply.php
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.