- This topic has 5 replies, 3 voices, and was last updated 12 years, 6 months ago by
.
-
Posts
-
@sew1842
SubscriberI shredded my offset pulley insert. The nut must have been loose and the splines on the pulley insert are screwed. My 05 Teacher has the 113 S&S and Rivera Primo running a 250 tire. Having trouble trying to find the right PN and who to get the part from. Any help would be greatly appreciated.
loop-single-reply.php
@bigr2645
SubscriberI have one for a 03 vindicator
loop-single-reply.php
@headjanitor
EditorThe pulley can be ordered from Rivera Engineering P/N 1.4375 V. I’d buy the used one from Big as long as the splines still have sharp edges. Save some money for gas.
loop-single-reply.php
@sew1842
SubscriberBig, I got one from Rivera. I will keep you in mind if I shred another. Thanks.
loop-single-reply.php
@sew1842
SubscriberDoes anyone know the torque specs for the 1 1/2 nut? And of course I will use lock tight.
loop-single-reply.php
@headjanitor
Editor180 ft lbs with lots of red loctite and let the loctite set up before you ride. Make sure you have the thick washer underneath the nut and make sure ALL the old loctite is cleaned off the crank and nut threads.
loop-single-reply.php
- You must be logged in to reply to this topic.