- This topic has 2 replies, 2 voices, and was last updated 11 years ago by
.
-
Posts
-
@bajarock
SubscriberI bought a 2004 Vengeance Vertabreaker yesterday from the original owner.
The bike is frecken awesome, it is pearlized white with yellow tear away paint.
The speedometer/tach cluster was taken off the bars and I want to put it back on.
There are three plugs that attach to the circuit board inside the speedometer and I have a question on placement.
Two plugs have three pin receptacles and the third plug has five. I would like to know if anyone has a wiring diagram of the speedometer
you could reference and let me know which of the two plugs that have the three receptacles each, goes where.I can see on the circuit board one spot is marked SPD and the other is PWR. One of the plugs is white and the other is the brownish red.
Which pin set does the white plug attach to, SPD or PWR?
Thank youloop-single-reply.php
@tasbo2
SubscriberYour best bet is to contact Dakaota Digital via email. I had to send my unit in for repair when I screwed it up. Very help full people, really went out of their way to get me going.
loop-single-reply.php
@bajarock
SubscriberOk, will do,thanks much
loop-single-reply.php
- You must be logged in to reply to this topic.