Home › Forums › Parts & Technical Info › Starter Clicks
- This topic has 8 replies, 3 voices, and was last updated 6 years, 4 months ago by
KINGP03.
-
AuthorPosts
-
January 25, 2019 at 1:28 am #10280
My 2003 Warrior will not start. It just clicks. I have it on charge for 2 hours a day with a battery charger and timer. I have put it on charge for a whole day. Still clicks.
Please help
loop-single-reply.phpJanuary 25, 2019 at 7:01 am #10283First replace your battery its $100 and if it is older than 2 years old it could have bad cells. Once you know for sure your battery is good then if you are still getting clicking its time to replace the starter. We got them from Spyke.
loop-single-reply.phpJanuary 25, 2019 at 10:39 pm #10285Will try that. Is there a rebuild kit for the starter if that is the problem?
Thanks
loop-single-reply.phpJanuary 26, 2019 at 10:47 am #10286You would need to check with Spyke they have new owners so I’m not sure if they still offer a rebuild service/kit.
http://spykeinc.com/starters.html
loop-single-reply.phpJanuary 28, 2019 at 3:06 am #10340February 2, 2019 at 9:32 am #10575I have 05 Banshee same problem 4 years ago, New Battery, Nope, Sent starter to Spyke for rebuild, Nope Finally starter relay in key switch box $17.00 — Fixed
loop-single-reply.phpFebruary 2, 2019 at 4:51 pm #10578Good point. Not a bad idea to check if the starter is actually getting the Amps via the relay. I had to replace the one of the relay’s on my Banshee too. Mine manifested when I was riding the relay got too hot and I lost electrical power. First the speed went out and then the bike shut down. My relay was pressed against the front edge of the key switch box which was very hot from the rear cylinder. New relay and a 1/4″ rubber spacer solved my problem. — Thanks! –S.
loop-single-reply.phpFebruary 3, 2019 at 7:50 pm #10685June 16, 2019 at 6:06 am #12754 -
AuthorPosts
- You must be logged in to reply to this topic.
