- This topic has 5 replies, 3 voices, and was last updated 11 years, 8 months ago by
.
-
Posts
-
@revemup
SubscriberHad to replace rear drive belt…..broke with less than 6000 miles??? Had to remove softail primary side pivot bolt to remove spacer and install the new belt.
Anyone have the torque specs for softail pivot bolts for 2005 Banshee….?
loop-single-reply.php
@headjanitor
Editor65 ft lbs with copper anti-seize NOT LOC-TITE.
loop-single-reply.php
@revemup
SubscriberThank you for the quick response!!!!! was getting info online 90 – 110 ft lbs, and also from Vance and hines site for stock softail to be 120 – 150 ft lbs…..both with red Loc Tite……
When I took the Banshee apart there was a great deal of red on the fine threads…….I will start with your recommendation of 65 ‘lbs and go with the anti seize…..will be easy to monitor any bolt movement.
Thank you again!!!!
loop-single-reply.php
@headjanitor
Editor110 ft lbs is right. I was looking at the wrong line on my chart. Make sure you use the anti-sieze and not the Loc-Tite or you’ll need to chase the threads in the pivot tube which is a pain.
loop-single-reply.php
@revemup
SubscriberThanks again Headjanitor…………big difference 65 compared to 110.
Actually considering the size of the bolt…..15/16 the 110 ft lbs makes a lot more sense…..When I originally removed the pivot bolt it took a 25″ breaker bar with a 1′ extension to crack it loose……sometimes RED really sucks!
Since I believe that RED Loc Tite was originally used for assembly, I will chase the threads of the bolt and pivot tube before reassembly…..I am going to also remove the other side bolt and evenly set the torque.
I WILL USE YOUR REVISED NUMBER, 110 FT LBS….WITH ANTISEIZE, NOT LOC TITE!
loop-single-reply.php
@bigr2645
Subscriberwow you got 6000 out of a belt i have broken two in 7000 and went to chain drive. nothing wrong with the belt drive just to many ponies and a wide back tire!!!!!!!
loop-single-reply.php
- You must be logged in to reply to this topic.