what is the procedure to remove the headlight lens

This topic has 3 replies, 2 voices, and was last updated 9 years, 10 months ago by Stephen Sharpe.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
January 13, 2015 at 4:40 am #3239

@gray
Subscriber

low beam out on my Banshee. removed 2 little allen screws located at the 6:00 posititon on the headlight. lens/ring will not budge. tried air press thru the screw holes, sprayed wd-40 around ring. wont budge. what is the step i am missing.

loop-single-reply.php

January 26, 2015 at 4:50 am #3242

@venmc
Administrator

Reach into the hole with a dental pick there is a spring in there you can catch the end and pull it out like a tape worm. The spring goes all the way around the headlight ring and traps the ring in the bucket.

loop-single-reply.php

February 3, 2015 at 1:34 pm #3243

@wulfband
Subscriber

Thanks for posting that response. I’ve been wondering the same thing myself about how to get into the light 🙂

loop-single-reply.php

February 4, 2015 at 2:12 am #3246

@venmc
Administrator

Its a pain in the A$$ and I’ve seen more that one headlight pried open with a screw driver and returned for warranty. 🙂

loop-single-reply.php
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.