Forum Replies Created
-
Posts
-
@bigr2645
SubscriberThank You
loop-single-reply.php
@bigr2645
Subscriberwell open to buying if you have some but what years soft tail will fit it? on the third set but cant remenbre what years worked for the 2003 vindicator
loop-single-reply.php
@bigr2645
SubscriberCould you send me another copy of the wiring I have a 2003 and I have lost the last one that was sent to me.
Thanks againloop-single-reply.php
@bigr2645
SubscriberLove to see one that was right !!!!!!!
loop-single-reply.php
@bigr2645
SubscriberAzure are great company to work with they designed the way it goes together and will most of the time send out at no charge. Also you can use a piece of copper wire out of 12/3 wiring in a pinch.
loop-single-reply.php
@bigr2645
SubscriberBest money I have spent is a manual plunger that bolts on end of starter for 50 dollars all u need to do is turn key on and push the plunger in, This bypasses all switches and relays. Has saved me more than once,
loop-single-reply.php
@bigr2645
SubscriberPlease email me a copy I also have a 2003 that had problem with wiring on flash Module Bigr2645@yahoo.com
loop-single-reply.php
@bigr2645
SubscriberNO I was talking about your shift pedal there is a round cap that screws off and there is three screws in there that comes loose. I used a strap wrench to take mine off. I have had to re-drill mine once and the last time I just replaced it. you can contact me@ Bigr2645@yahoo.com would be happy to walk you thru it.
loop-single-reply.php
@bigr2645
SubscriberCheck you shifter there is three screws inside cover that gets loose causing this problem.
loop-single-reply.php
@bigr2645
SubscriberJust go to auto zone or local auto parts store and buy the replace blub 1157 with LEDs they are about 14 each when I bought mine but been running them for years. The regular bulb kept going out from the vibration. No load equalizer needed.
loop-single-reply.php
@bigr2645
SubscriberI have been running LED turn signals bulbs since first year. Expensive but well worth it!!!!!!!!!
loop-single-reply.php
@bigr2645
Subscriberthe starter is the org spyke starter 1.4 have had it rebuild every two years
loop-single-reply.php
@bigr2645
Subscriberno it has the org starter 1.4 and the bushing was hard to press in so the chance of it coming out with out damage to primary is slim.
loop-single-reply.php
