Forum Replies Created
-
Posts
-
@marks-raider
Subscriberyes, I did. I have a biker Pal that has a Bourget. It is a Beautiful bars on it/ I called Roger Bourget who is the custom chopper builder and sent him a pic of my bike. He will ask how tall you are. He nailed mine! Glad I did it! Check him out
loop-single-reply.php
@marks-raider
SubscriberHello John, I am also a Raider owner /in the middle of a electrical nightmare . I changed my handlebars 3 weeks ago and haven’t had my bike up since, Some was self-inflicted as A friend helped but cut the wiring harnesses completely out. Needless to say it looked like spaghetti to me being a inexperienced electrical rider. I had another person come by and had it up and running. I think he did make a bypass though. After he left, I went to tighten up everything. That is where I made a mistake by pushing up the splash guard and I think shorting something out.Since my latest short , I can use my starter button without a key and have no lights and I hear a reset click until I had to disconnect the battery. I have read all your postings and you seem to have this under control after experiencing your own electrical problems.
Any help you can offer will be more than greatly appreciated as you can imagine! Thank you, Mark Wood Richmond, Va 804 307-8720 or emailloop-single-reply.php
@marks-raider
SubscriberThank you for the reply, I checked the key box and someone before I owned it moved the fuse box. it now is behind the splash guard where I replaced the 5 fuses that were in there. Not really sure what they were to but only one that I could tell was blown and that was a 5 amp fuse.Still it was no help. Where will I find the 30 amp breaker? the current situation is my starter fires directly without the key and I have no lights. It will not fire either. Thanks for any other info…
loop-single-reply.php
@marks-raider
SubscriberThanks, thats where I got them thanks to you Wulfband
loop-single-reply.php
@marks-raider
SubscriberThank you!got them out and used blue locktite. Definitively works great
loop-single-reply.php
@marks-raider
SubscriberThanks for your help.
loop-single-reply.php
@marks-raider
SubscriberThanks a lot. I actually had great luck ordering from Amazon for a nice chrome hosed unit for 59.00. I called J and p cycles tech to confirm correct model or part #. Thank again, safe riding, Mark
loop-single-reply.php
@marks-raider
SubscriberI feel that they were the originals after talking to them on the phone. They say they havent had any returns for the 2005 and prior custom tanks.You can see good pics as well as dimensions as well. here is the link. good luck, it worked great for me.
loop-single-reply.php
@marks-raider
SubscriberYes , here is one of the links from California. The second link is another from Worcester Mass. that is 1/4 shorter that fits flush to my tank. I hope it helps you all like it did me.
http://www.ebay.com/itm/380689734110?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
loop-single-reply.php
@marks-raider
SubscriberThanks for your help. If you need more caps, I found them on ebay for 29.95 with free shipping. Fits and looks like the original
loop-single-reply.php
@marks-raider
SubscriberThanks for your help. Also just an fyi, I was able to find 2 sellers on ebay that sold my cap for 29.95 from California and another one from Boston for 39.95. They both fit and at a great price. not a bad idea for a back up.
loop-single-reply.php
@marks-raider
SubscriberThank you but would you know where I can buy one? Is there a part # or something to refer to…Im striking out of all calls I make and several websites.Thanks alot
loop-single-reply.php
@marks-raider
SubscriberThank you Unlucky! That sounds great. I like the look of the 30 inch one. I would like to use my factory brackets if I could. Thanks a lot.Really do appreciate your help! i would love to see what he has done to yours. Thanks, Mark 804 307-8720
loop-single-reply.php
@marks-raider
SubscriberIm in Richmond Va
loop-single-reply.php
@marks-raider
SubscriberHello there unlucky! Thanks for the reply. Im in Va on east coast also. Im looking to get a bar made about 30 inches tall but want to utilize the original brackets (hardware). Please let me know. Most appreciated! Marks Raider
loop-single-reply.php
