- This topic has 11 replies, 2 voices, and was last updated 5 years, 5 months ago by
.
-
Posts
-
@jack
SubscriberMy bad 04 Warrior
loop-single-reply.php
@venmc
AdministratorLove the chopped fender.
Also you’ve got a box with breakers mounted on the swingarm slash guard. Its a PITA to get to as you need to remove the rear wheel. (Later these were all moved into a larger key switch box.) The wiring diagram is posted in the technical section.
loop-single-reply.php
@jack
SubscriberI’m changing out the speedo. I am looking for the wire config of your factory speedo. I can’t seem to find it. So far I found 6 of the 13 wires i need. I need the oil, nertural, hi beam, speed and tach wire colors. any help would be great.
loop-single-reply.php
@venmc
Administratorloop-single-reply.php
@jack
Subscriber
loop-single-reply.php
@jack
SubscriberI’m looking for the speedo diagram. do you still talk to erin your wire guy?
loop-single-reply.php
@venmc
AdministratorUnfortunately, no I’ve lost track of Aaron but that diagram is available from Dakota Digital here:
loop-single-reply.php
@jack
SubscriberYea, I’ve seen that one the wires are’nt the same colors. Man I got say you are a huge help though. You can really tell you miss it. One more topic question for ya. my bike wants to lean left alittle when I’m riding can that be adjusted with the rims/ breaks or is it that a off set balance of the motor?
loop-single-reply.php
@venmc
AdministratorInteresting… I’d suggest reaching out to Dakota Digital it sounds like they may have changed the colors. The lean is definitely from the offset. Those look like the original rims so you aren’t going to make it any better. We used wheels with a little offset to compensate for the LSD. Let me know what Dakota says.
loop-single-reply.php
@jack
SubscriberWill do I’ll call them monday
loop-single-reply.php
@jack
Subscriber
loop-single-reply.php
- You must be logged in to reply to this topic.